>> VS900-III EtCO2 Monitor

简体中文

ENGLISH

Products

Location: Home >> Products >> Patient Monitor >> VS900-III EtCO2 Monitor

Patient Monitor

DescriptionDetailSpecification

VS900-III EtCo2 Monitor

Feature:

¨ Suitable for monitoring adult, pediatric and neonatal patient.

¨ Standard parameters: EtCo2 and SpO2

¨ High brightness cold cathode fluorescent backlight LCD display

¨ Advanced digital processing technology providing accurate measurement during low perfusion and movement situation

¨ Adjustable audible and visual alarms

¨ Built-in large capacity rechargeable lithium battery support up to 10 hours working-time

Standard Configuration:

¨ Main unit

¨ Adult EtCo2 sensor

¨ Adult SpO2 Probe

¨ AC Power charger

¨ User’s manual

Optional Configuration:

¨ Pediatric / neonatal accessories: reusable SpO2 probe; disposable SpO2 probe

VS900-III EtCo2 Monitor

Physical Specifications
Dimension and Weight	Dimension	230mm(W)90mm(H)280mm(L)
	Weight	standard configuration 2 kg（with battery）
Operation Environment	Power Requirements	AC 100-250V, 50/60Hz,
	Power	20VA
	Temperature	5-40℃
	Humidity	15-93% non-condensing
Safety	Meet the requirement of IEC60601 series
Performance Specification
Display	LCD
Display mode	1 Plethysmogram waveform
Interface	Parameter cable interface AC power input socket
Battery	Lithium battery inside, 3 hours for charging, 6 hours for continuous working
Alarm Indicator	Alarm indicator light, power indicator light pulse tone alarm sound button tones
Alarm	User-adjustable high and low limits 3-level audible and visual alarm
SpO₂
Measurement range:	0%-100%
Resolution:	1%
Accuracy:	±2% (70-100%, Adult/Pediatric, non-motion ) ±3% (70-100%, Neonate, non-motion ) ±3% (70-100%, Adult/Pediatric/Neonate, motion ) 0-69% unspecified
Alarm range:	Alarm high limit range 31-100% Alarm low limit range 20-99%
Refreshing rate	0.5s
EtCO₂ (Side stream CO₂)
Measurement range	0-99mmHg
Accuracy	±2mmHg(0-40mmHg) ±5% of reading(41-76mmHg) ±10% of reading (77-99mmHg)
Resolution	1mmHg
Sampling rate	70m1/min 100m1/min
Sampling rate accuracy	0.15 or 15m1/min
Start-up time	30 Sec. the module enters the warming up status after the start up. 1 minute later, it enters the ready-to-measure status.
Respiration rate	3-150 rpm
Respiration rate accuracy	±2BrPM (0-70BrPM) ±5BrPM (>70BrPM)
Response time	When measured with a neonatal water trap and a 2.5 m-long neonatal sampling line: < 3.5 s @ 100 ml/min <4 s @ 70 ml/min
	When measured with an adult water trap and a 2.5 m-long adult sampling line: <5.5 s @ 100 ml/min <7 s @ 70 ml/min
Delay time	When measured with a neonatal water trap and a 2.5m-long neonatal sampling line: <3 s @ 100 ml/min <3.5 s @ 70 ml/min
	When measured with an adult water trap and a 2.5m-long adult sampling line: <5 s @ 100 ml/min <6.5 s @ 70 ml/min